Akimbo

These Akimbo Instructions is an outdated version. If you purchased your controller after 1/14/2019 or want to get familiar with the latest software update please visit this page.

What is Akimbo Mod?

With Akimbo mod you will get the maximum out of your semi-auto dual-wielded handguns as your soldier will be able to shoot both pistols simultaneously while pressing just one button. Another advantage of the mod is that it makes it easier to fire dual-wielding fully-automatic weapons.

Usually you will have to pull both triggers to fire your semi-auto dual-wielded handguns and this is not always convenient. With activated Akimbo, you no longer have to pull RT and LT at the same time as you will get Rapid Fire on both pistols by holding down just RT button (in default button layout) plus your handguns will be added the power of Rapid Fire. The mod is lethal at close range.

How Do I Operate Akimbo Mod?

To activate:

• Hold down mod switch on the back
• Tap D-pad Left button
• LED 1 indicator will glow BLUE. Then equip your soldier with dual-wielded pistols. Once your soldier is equipped, press and hold Right Trigger (RT in default button layout). The modchip will take over and unload the clips on both pistols.

To scroll to the next mode:

• Make sure Akimbo Mode is ON in order to change to the next modes
• Hold down mod switch on the back
• Hold down D-pad left button
• LED 1 will blink in BLUE to indicate which mode you are changing to. Select the mode from the list below that is most appropriate for you. You can also customize the rapid fire speed of each mode (see “What Is Programming Mod?” below).

There are several different Akimbo modes available that allow you to further customize your Akimbo experience. Use modes 1 through 3 if your pistols are semi-automatic and it will add rapid fire to your pistols. Use Mode 4 if your pistols are fully-automatic.

• Mode 1: 9.5 shots-per-second. When you scope in your primary rifle, Rapid Fire stays turned on, Akimbo is OFF.
• Mode 2: 9.5 shots-per-second. When you scope in your primary rifle, Rapid Fire turns off. Akimbo is OFF.
• Mode 3: 9.5 shots-per-second. Akimbo mode stays turned on always.
• Mode 4: 9.5 shots-per-second. Mimic mode. Pull the Right Trigger (RT in default), modchip automatically presses Left Trigger (LT in default).

To turn OFF:

• Hold down mod switch on the back
• Tap D-pad Down button
• First LED will turn OFF. Akimbo is OFF.

What Games Is Akimbo Mod Compatible With?

Akimbo Mod is compatible with all Call Of Duty titles.

What Is Programming Mode?

Don't like the pre-tuned speed we've provided? Create-your-own!

Reprogram your Akimbo modes to any speed from 5 shots-per-second up to 99 shots-per-second. Akimbo speed is programmed by individually setting the tens digit, the ones digit, and the decimal digit. For example, if the speed is 12.0 shots per second. "1" is the tens digit, "2" is the ones digit, and "0" is the decimal digit. Any time an LED flashes very quickly, this means one of your numbers is set to "0". Otherwise, it will slowly blink the number.

It's also important to know that the software developers for each video game may have set a universal speed cap. The cap is different for every game. If you try to dial in your Akimbo speed above this cap, your gun will actually shoot slower, or not shoot at all.

How do I program in my very own custom Akimbo speed?

• Turn on Akimbo and scroll to the mode you would like to edit.
• Hold the mod switch on the back and then tap the Sync (Connect) Button. All four LED’s will light up in WHITE to let you know that it’s waiting for further input.
• Tap D-pad Left button. All four LED’s will blink in BLUE to let you know we’re going to start programming the Akimbo speed. Let’s say your speed started at 9.5 shots per second. The mod will blink the “tens” digit on LED 1. In this case, the tens digit is 0 (since you’re at 9.5 shots, there’s no digit in the tens place). The mod will do a very quick flash to indicate a “0”.
• Tap the Left Trigger to decrease the tens digit, or tap the Right Trigger to increase the tens digit. The mod will blink in BLUE on LED 1 to let you know what the current number is. When you’re happy with the number →
• Tap the mod switch to move to the next number. Now we’re at the “ones” digit and they will blink on LED 2. Follow the procedure from above.
• Tap the Left Trigger to decrease the ones digit, and tap the right trigger to increase the ones digit.
• Tap the mod switch to save that digit and move to the decimal place. Lastly, we’re at the decimal place. Digits will blink on LED 3. Follow the procedure from above one last time.
• Tap the Left Trigger to decrease the decimal, and tap the Right Trigger to increase the decimal.
• Tap the mod switch to save your selection. The mod will blink all LED’s in BLUE three more times to let you know that your new speed was saved.

The controller will always remember the last programming speed you have before powering down.