Hello, I am trying to set up the turbo function on the controller for WWE 2K22 to button bash to kick out of pins but the button bashing is not fast at all and it is not at all succesful and I am not sure what I am doing wrong? Please help.
Hello, I am trying to set up the turbo function on the controller for WWE 2K22 to button bash to kick out of pins but the button bashing is not fast at all and it is not at all succesful and I am not sure what I am doing wrong? Please help.
Hello,
Thank you for choosing our Mods + Remap +Turbo PS5 controller configuration. The first step is to map a back button to the desired face button, and then get into the sub mode 2 (Turbo). Turbo comes with pre-set timings, but if you find them not optimal for you game, you can program your own timings for button presses and the time between the presses. You can choose any value from 50 ms to 3 sec.
Yes I did that as I have the advanced one but unless I am doing the timing wrong, I am just finding that it is not fast at all when I am try to button bash to kick out of the pins?
Yes I did that as I have the advanced one but unless I am doing the timing wrong, I am just finding that it is not fast at all when I am try to button bash to kick out of the pins?
What button are trying to map and what timing are you programming in?
The X button and I just want it to spam as fast as possible to beat the pin mini button game and I am trying to makke it just tap the button as fast as possible.
The X button and I just want it to spam as fast as possible to beat the pin mini button game and I am trying to makke it just tap the button as fast as possible.
Thank you. Ok, 50 ms is the timing between the button presses (off timing) will be the fastest.
50 ms is tens of milliseconds and is displayed via digit 4 on the LED indicator, all other steps are found under the section I mentioned above in https://megamodz.com/PS5-Controller-Paddles.
How do I know when its on that because I have the seconds on 0 and the hundreds of milliseconds on 0 but not sure how to tell what the tens of seconds its on because it shows 2 green lights and 2 red lights instead? Also, so if I put the off timing on 50ms what do I put the on timing on please?
How do I know when its on that because I have the seconds on 0 and the hundreds of milliseconds on 0 but not sure how to tell what the tens of seconds its on because it shows 2 green lights and 2 red lights instead? Also, so if I put the off timing on 50ms what do I put the on timing on please?
Hello,
The fastest turbo mod speed would be 50 ms for ON timing and 50 ms for OFF timing.
Please visit the link below and scroll to the "Setting Up Custom Values For Turbo Mod" section.
There is a GIF showing the digit numbers indication. 2 green and 2 red means the digit number is 6, because it first shows all 4 leds in red and then the two green ones overlap the two red ones. Just go one digit back (green, red, red, red) and it will be 50 ms number. Suppose you already configured seconds and tens of seconds as 0. Do that for both, ON and OFF timing.
The lowest I seem to be able to get is 2 Green and 2 reds for the ms one and it is not fast enough at all for what I have brought the controller for meaning it does not really have any value to me?
The lowest I seem to be able to get is 2 Green and 2 reds for the ms one and it is not fast enough at all for what I have brought the controller for meaning it does not really have any value to me?
Once again. The fasters Turbo Mod value would be 50 ms for both ON & OFF timing. ON and OFF timing has to be configured in different steps, separately. If you only configured the ON timing it doesn't mean the OFF timing will be changed automatically. And if your ON timing is 50 ms and the OFF timing is 200 ms for example, it wouldn't give you the fastest possible output.
50 ms LED Indication is the following:
The Seconds value should be zero = 4 Yellow Lights
The Tens of seconds value should be zero = 4 Yellow Lights
Hundreds of milliseconds value should be 5 = Green, Red, Red, Red (1ST, 2,3, and 4 LED Indicator slots)
If that is not fast enough, then that particular game you play has a speed cup preset by the game developer. This means, that if you are even able to press buttons faster than that, the game will register the speed that is the maximum allowed in that particular situation. It has nothing to do with the Turbo Mod. The controller still spams the button fast enough. It's just the game has that speed limitation.
As far as the product value, no one else on the market offers Turbo Function that can be configured on the back paddles. They all offer only the "Straight Remap" functionality which comes by default on all our controllers with back paddles. Not to mention, at best our product prices are in the same range if not lower than the competition.
If the product didn't meet your expectation you can always send it back for a refund. As long as you are in the "10 days return window policy" and the product is in the original condition.
I understand what you are saying but I am saying that for some reason for the hundreds of milliseconds the lowest this controller seems to be allowing me to set it to is 60ms, 2 greens and 2 reds. I can’t go down to 50ms for some reason!
I understand what you are saying but I am saying that for some reason for the hundreds of milliseconds the lowest this controller seems to be allowing me to set it to is 60ms, 2 greens and 2 reds. I can’t go down to 50ms for some reason!
To put this into prospective. A blink of an eye takes between 200 and 300 ms.
At best a human brain can register 100 ms (the fasterst speed it can process information). It does not operate on tens of milliseconds. There is now way anyone can tell the difference between 50 and 60 ms. It's just too tiny of a number. In other words, to a human brain it will look the same whether it's 50 or 60 ms.
If you wish you can send the controller back and we will troubleshoot an inability to go down as low as 50 ms.
I am also wondering the best setting for wwe 2k22 with the cup limiter? Is it even possible to use the turbo mod for kick out pin? Is it a certain number required not to fast not to slow?
I am also wondering the best setting for wwe 2k22 with the cup limiter? Is it even possible to use the turbo mod for kick out pin? Is it a certain number required not to fast not to slow?
Hello,
Can you please describe the game mechanics of this particular action? The more details the more accurate information i can provide.
A thing about Turbo Mod to keep in mind. It is based on two variables. The time a button is being pressed (ON timing) and the time a button is being released (OFF timing). Both can be configured VIA a programming mod. More on that here
If you want to imitate a button mashing VIA the Turbo Mod for a particular gaming situation you may need to play around with timing. Decreasing or increasing both variables until it matches the game mechanics.
I've tried to find it for hours, I tried the min/max, many various combinations. Double triple and single tap. I even made the double and triple tap cycles equal to the pin time (3k milliseconds) using the formula. But none of these work can someone please help
I've tried to find it for hours, I tried the min/max, many various combinations. Double triple and single tap. I even made the double and triple tap cycles equal to the pin time (3k milliseconds) using the formula. But none of these work can someone please help
Non of those functions (double, triple and single taps) fit the situation you're describing (mashing the X button).
The only function that is gonna work is Turbo Mod.
In your estimation how fast you tap the X button manually in order to perform the action you need? As a reference point a blink of an eye is about 200-300 ms.
Besides mashing the X button do you have to do any manipulations with the Right Stick or any other controller button? Or it's just exclusive the X button being pressed and released as fast as possible?
Recommended Posts
Kolawole Oshun
Hello, I am trying to set up the turbo function on the controller for WWE 2K22 to button bash to kick out of pins but the button bashing is not fast at all and it is not at all succesful and I am not sure what I am doing wrong? Please help.
Link to comment
Share on other sites
James Brady
Hello,
Thank you for choosing our Mods + Remap +Turbo PS5 controller configuration. The first step is to map a back button to the desired face button, and then get into the sub mode 2 (Turbo). Turbo comes with pre-set timings, but if you find them not optimal for you game, you can program your own timings for button presses and the time between the presses. You can choose any value from 50 ms to 3 sec.
To program own timings, please scroll down to the Setting Up Custom Values For Turbo Function section in the Instructions here https://megamodz.com/PS5-Controller-Paddles
Link to comment
Share on other sites
Kolawole Oshun
Yes I did that as I have the advanced one but unless I am doing the timing wrong, I am just finding that it is not fast at all when I am try to button bash to kick out of the pins?
Link to comment
Share on other sites
James Brady
What button are trying to map and what timing are you programming in?
Link to comment
Share on other sites
Kolawole Oshun
The X button and I just want it to spam as fast as possible to beat the pin mini button game and I am trying to makke it just tap the button as fast as possible.
Link to comment
Share on other sites
James Brady
Thank you. Ok, 50 ms is the timing between the button presses (off timing) will be the fastest.
50 ms is tens of milliseconds and is displayed via digit 4 on the LED indicator, all other steps are found under the section I mentioned above in https://megamodz.com/PS5-Controller-Paddles.
Let us know if you were able to program it.
Link to comment
Share on other sites
Kolawole Oshun
How do I know when its on that because I have the seconds on 0 and the hundreds of milliseconds on 0 but not sure how to tell what the tens of seconds its on because it shows 2 green lights and 2 red lights instead? Also, so if I put the off timing on 50ms what do I put the on timing on please?
Link to comment
Share on other sites
Mundus Gubernavi
Hello,
The fastest turbo mod speed would be 50 ms for ON timing and 50 ms for OFF timing.
Please visit the link below and scroll to the "Setting Up Custom Values For Turbo Mod" section.
https://megamodz.com/PS5-Controller-Paddles
There is a GIF showing the digit numbers indication. 2 green and 2 red means the digit number is 6, because it first shows all 4 leds in red and then the two green ones overlap the two red ones. Just go one digit back (green, red, red, red) and it will be 50 ms number. Suppose you already configured seconds and tens of seconds as 0. Do that for both, ON and OFF timing.
Link to comment
Share on other sites
Kolawole Oshun
The lowest I seem to be able to get is 2 Green and 2 reds for the ms one and it is not fast enough at all for what I have brought the controller for meaning it does not really have any value to me?
Link to comment
Share on other sites
Mundus Gubernavi
Once again. The fasters Turbo Mod value would be 50 ms for both ON & OFF timing. ON and OFF timing has to be configured in different steps, separately. If you only configured the ON timing it doesn't mean the OFF timing will be changed automatically. And if your ON timing is 50 ms and the OFF timing is 200 ms for example, it wouldn't give you the fastest possible output.
50 ms LED Indication is the following:
The Seconds value should be zero = 4 Yellow Lights
The Tens of seconds value should be zero = 4 Yellow Lights
Hundreds of milliseconds value should be 5 = Green, Red, Red, Red (1ST, 2,3, and 4 LED Indicator slots)
If that is not fast enough, then that particular game you play has a speed cup preset by the game developer. This means, that if you are even able to press buttons faster than that, the game will register the speed that is the maximum allowed in that particular situation. It has nothing to do with the Turbo Mod. The controller still spams the button fast enough. It's just the game has that speed limitation.
As far as the product value, no one else on the market offers Turbo Function that can be configured on the back paddles. They all offer only the "Straight Remap" functionality which comes by default on all our controllers with back paddles. Not to mention, at best our product prices are in the same range if not lower than the competition.
If the product didn't meet your expectation you can always send it back for a refund. As long as you are in the "10 days return window policy" and the product is in the original condition.
Hope that helps.
Link to comment
Share on other sites
Kolawole Oshun
I understand what you are saying but I am saying that for some reason for the hundreds of milliseconds the lowest this controller seems to be allowing me to set it to is 60ms, 2 greens and 2 reds. I can’t go down to 50ms for some reason!
Link to comment
Share on other sites
Mundus Gubernavi
To put this into prospective. A blink of an eye takes between 200 and 300 ms.
At best a human brain can register 100 ms (the fasterst speed it can process information). It does not operate on tens of milliseconds. There is now way anyone can tell the difference between 50 and 60 ms. It's just too tiny of a number. In other words, to a human brain it will look the same whether it's 50 or 60 ms.
If you wish you can send the controller back and we will troubleshoot an inability to go down as low as 50 ms.
Link to comment
Share on other sites
Justin Jeffries
I am also wondering the best setting for wwe 2k22 with the cup limiter? Is it even possible to use the turbo mod for kick out pin? Is it a certain number required not to fast not to slow?
Link to comment
Share on other sites
Mundus Gubernavi
Hello,
Can you please describe the game mechanics of this particular action? The more details the more accurate information i can provide.
Link to comment
Share on other sites
Justin Jeffries
It's a mini game where you just mash the X button
Link to comment
Share on other sites
Mundus Gubernavi
The Turbo Mod feature can definitely handle that.
A thing about Turbo Mod to keep in mind. It is based on two variables. The time a button is being pressed (ON timing) and the time a button is being released (OFF timing). Both can be configured VIA a programming mod. More on that here
https://megamodz.com/instructions/ps4/macro-remap
If you want to imitate a button mashing VIA the Turbo Mod for a particular gaming situation you may need to play around with timing. Decreasing or increasing both variables until it matches the game mechanics.
Link to comment
Share on other sites
Justin Jeffries
I've tried to find it for hours, I tried the min/max, many various combinations. Double triple and single tap. I even made the double and triple tap cycles equal to the pin time (3k milliseconds) using the formula. But none of these work can someone please help
Link to comment
Share on other sites
Mundus Gubernavi
Non of those functions (double, triple and single taps) fit the situation you're describing (mashing the X button).
The only function that is gonna work is Turbo Mod.
In your estimation how fast you tap the X button manually in order to perform the action you need? As a reference point a blink of an eye is about 200-300 ms.
Link to comment
Share on other sites
Justin Jeffries
Link to comment
Share on other sites
Mundus Gubernavi
Besides mashing the X button do you have to do any manipulations with the Right Stick or any other controller button? Or it's just exclusive the X button being pressed and released as fast as possible?
Link to comment
Share on other sites
Justin Jeffries
No other buttons just the X button
Link to comment
Share on other sites
Mundus Gubernavi
Is there any meter available while the action is performed?
Link to comment
Share on other sites
Justin Jeffries
No, the meter is only for offline and is a different mini game that can be changed in settings. It is strictly mashing x button
Link to comment
Share on other sites
Justin Jeffries
There is a gauge though that needs to be filled with x presses
Link to comment
Share on other sites
Mundus Gubernavi
The fastest turbo mod speed 50 ms ON time and 50 OFF time should work just fine then.
Link to comment
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now