Mashing buttons with Macro Remap

[Estevan Gislason]

 So I binded my R2 to mash really fast and when I set it to x so it can press x really fast it was just pushing it super slowly.  Is this normal for it to mash R2 super fast and X super slow?

[James Brady]

Hi, default timing for each button is different and you can change the timing via programming mode (min value 50ms. max 3 seconds). Keep in mind please there are 2 timing adjustments you can make:
1. ON button timing ( how long a paired button is being held) 
2. OFF button timing (pause between button presses) 

So if you want the modchip to spam the X button really fast , you want to configure ON and OFF button timing around 100ms. Refer to this page https://megamodz.com/instructions/ps4/macro-remap  Setting Up Custom Values Section

You will only need to configure it once and the modchip will always remember your setup/timing.

The same stock button can be configured on both Macro Buttons with different settings/timing.  Reset to factory default will erase your previous settings.