Leaderboard

Hi Brian, You have purchased a modded controller. It is not the same as a macro controller, and your product has no macro buttons installed. What you see on the back are remapping buttons and you need to use the instructions for those (not for the macro buttons you do currently). Here are the steps https://megamodz.com/instructions/ps4/paddles : Hold mod switch + tap PS Home button to enter the mod programming menu. All four LED’s will turn white, and then the mod waits for you to enter a selection. Press any re-mappable button to program it, and the four LED’s will blink once slowly to let you know it’s ready for your selection. Then press any stock button. The four LED’s will blink twice to confirm that it accepted your selection. To configure another re-mappable button, press the other back button (mod will blink slowly once) and then press the stock button you want to assign to that remappable button (mod will blink twice). When you’re all done configuring your back buttons and are ready to save your changes, hit the mod switch. All four LED’s will blink quickly three times to confirm that your new settings were saved, Mod will then exit the programming menu.